### APLIKASI GOAL CHASING SEBAGAI METODE PERBAIKAN PENJADUALAN PRODUK UNTUK MENENTUKAN JUMLAH PRODUK DAN MENGURANGI PEMBOROSAN WAKTU PROSES

#### Sari

*The assembling process represent one activity of exist in company of where in course of this assembling is frequently happened by the component heaping to pursue the production process activity, others also will be happened by the extravagance effect to the number of component awaiting to be assembling. To avoid the mentioned needed by a schedule produce to sort the such product to be assembling beforehand and how much its component requirement amount. *

*To make the schedule massage and determine the component requirement with the goal chasing method conducted : firstly determine the product amount, second determine the time of cycle and mean of cycle time, third of schedule compilation massage by determining apart the minimum, fourth determine the preparate deviation. To lessen the extravagance with the method repair work.*

*Goal chasing method yielded the massage schedule which is either due comparison of preparate deviation. At company with the calculation result is 270.654 : 24811 this meaning result of calculation use the goal chasing method better chasing because smaller preparate deviation. By depressing time-wasting hence will improve the product amount yielded by that is : At product of Mistra Chair happened by the extravagance in 11 day of equal to 58,153 minutes and after existence of extravagance reduction hence can produce during 11 days from 14 units become 16 units. At Patio product happened by the extravagance in 8 days of equal to 40.77 minutes / unit and after existence of extravagance reduction hence can produce during 8 days from 10 units become 11 unit. At product of Laigh Chair happened by the extravagance in 9 days of equal to 46.485 minutes / unit and after existence of extravagance reduction hence can produces during 9 days from 10 units become 11 units. At Sartika product happened by the extravagance in 8 days equal to 42.27 minutes and after existence of extravagance reduction hence can produce during 8 days from 8 units become 9 units.*

*Key Word : Goal Chasing, Shedule, Extravagance*

#### Teks Lengkap:

PDF#### Referensi

Gasperz, V., 2001, Production Planning And Inventory Control Berdasarkan Pendekatan System Terintegrasi MRP II & JIT Menuju Manufacturing 21, PT. Gramedia Pustaka Utama, Jakarta.

Imai, M., 1997, Gemba Kaizen, McGrow-Hill.

Monden, Y., 1993, Alih Bahasa Edi Nugroho, 2000, Sistem Produksi Toyota, Edisi I, PPM, Jakarta.

Monden, Y., 1993, Alih Bahasa Edi Nugroho, 2000, Sistem Produksi Toyota, Edisi II, PPM, Jakarta.

Nasution, A.H., 1999, Perencanaan dan Pengendalian Produksi, Guna Widya, Suabaya.

Vinle, J.D., 1995, Alih Bahasa, Syarifudin, Dasar-dasar manufaktur Konsep Fundamental Pembuat Keputusan, Cetakan II, PPM, Jakarta.

Widiyono, 2000, Analisis Penjadualan Urut Guna Mencapai Produksi Just In Time (JIT), Skripsi Teknik Industri, IST AKPRIND, Yogyakarta.

Yamit, Z., 1999, Manajemen Persediaan, Ekonomisia, Yogyakarta

### Refbacks

- Saat ini tidak ada refbacks.

Jurnal Teknologi by Institut Sains & Teknologi AKPRIND is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Based on a work at http://journal.akprind.ac.id.